To manufacture inexpensive and disposable bio-electronic devices, a R2R printing method has been fully utilized as a large-scale advanced manufacturing platform (LAMP) to fabricate new bio-electronic circuits such as all printed neuromorphic controller and TFT-sensor array matrix through developing bio-electronic inks and optimizing cell printing.
학력
1989 BS (Chemistry), Natural Science College, Kyunghee University, Korea
1995 Ph.D (Chemistry), University of Oklahoma, USA
약력/경력
Professor of Biophysics, Institute of Quantum Biophysics, Sungkyukwan University, 2019. 09 – present
Visiting Scholar of EECS, University of California, Berkeley, 2013. 09- 08. 2016
Visiting Research Engineer of EECS, University of California, Berkeley, 2011.09 – 2013.08
Visiting Professor of Materials and Construction Lab, Tokyo Institute Technology, 2013, 06 - 2013, 08
Professor of Printed Electronics Engineering, World Class University (WCU) Program in Sunchon National University, 2008- 2019. 08
Professor of Chemical Engineering, Sunchon National University, 1996 – 2008
Visiting Research Scholar, Rice University, 2004, 12 – 2006, 03.
Chair of Regional Innovation Center: Specialized Printed Electronics in Sunchon National University, 2005, 03- 2019. 08
Chair of Research Consortium for Developing Roll to Roll Printed RFID Tags, 09/2007- 08/2012
학술지 논문
(2023)
Plasmonic materials and manufacturing methods for rapid and sustainable thermal cycler for PCR.
MATERIALS TODAY ADVANCES.
20,
N
(2023)
Control of the coffee ring effect during R2R gravure printing for minimizing threshold voltage variation in printed carbon nanotubebased thin film transistors.
MATERIALS TODAY ADVANCES.
18,
00
(2023)
Tuning the charge carrier polarity of roll-to-roll gravure printed carbon nanotube-based thin film transistors by an atomic layer deposited alumina nanolayer.
NANOSCALE ADVANCES.
5,
15
(2023)
Towards Digital Twin Implementation in Roll-To-Roll Gravure Printed Electronics: Overlay Printing Registration Error Prediction Based on Printing Process Parameters.
NANOMATERIALS.
13,
6
(2023)
Rapid Uniformity Analysis of Fully Printed SWCNT-Based Thin Film Transistor Arrays via Roll-to-Roll Gravure Process.
NANOMATERIALS.
13,
3
(2023)
Improving Stability of Roll-to-Roll (R2R) Gravure-Printed Carbon Nanotube-Based Thin Film Transistors via R2R Plasma-Enhanced Chemical Vapor-Deposited Silicon Nitride.
NANOMATERIALS.
13,
3
(2022)
Classification and redundancy quantitative evaluation algorithm for highly effcient fault diagnosis of rotary machines in roll-to-toll system.
MEASUREMENT.
206,
(2022)
Vancomycin-conjugated polydopamine-coated magnetic nanoparticles for molecular diagnostics of Gram-positive bacteria in whole blood.
JOURNAL OF NANOBIOTECHNOLOGY.
20,
1
(2022)
Control of the Drying Patterns for Complex Colloidal Solutions and Their Applications.
NANOMATERIALS.
12,
15
(2022)
Enhancing Mixing Performance in a Rotating Disk Mixing Chamber: A Quantitative Investigation of the Effect of Euler and Coriolis Forces.
MICROMACHINES.
13,
8
(2022)
Fully roll-to-roll gravure printed electronics: challenges and the way to integrating logic gates.
JAPANESE JOURNAL OF APPLIED PHYSICS.
61,
SE
(2022)
Strain Optimization of Tensioned Web through Computational Fluid Dynamics in the Roll-to-Roll Drying Process.
POLYMERS.
14,
12
(2022)
Effect of Radial Stress on the Nanoparticle-Based Electrolyte Layer in a Center-Wound Roll with Roll-to-Roll Systems.
NANOMATERIALS.
12,
6
(2022)
Achieving specified geometric quality in a fully printed flexible functional layer using process parameters in roll-to-roll printed electronics.
FLEXIBLE AND PRINTED ELECTRONICS.
7,
1
(2022)
Characterization of silver nanoparticle inks toward stable roll-to-roll gravure printing.
FLEXIBLE AND PRINTED ELECTRONICS.
7,
1
(2021)
Impact of Sensor Data Characterization with Directional Nature of Fault and Statistical Feature Combination for Defect Detection on Roll-to-Roll Printed Electronics.
SENSORS.
21,
24
(2021)
Fully roll-to-roll gravure printed 4-bit code generator based on p-type SWCNT thin-film transistors.
FLEXIBLE AND PRINTED ELECTRONICS.
6,
4
(2021)
Roll-to-Roll Gravure-Printed Carbon Nanotube-based Transistor Arrays for a Digital Column Chromatograph.
ADVANCED MATERIALS TECHNOLOGIES.
00,
00
(2021)
Printed Four Key-Device Units for Unified Platform of Wireless Anti-Counterfeiting Label to Bridge in Blockchain.
ADVANCED MATERIALS TECHNOLOGIES.
7,
5
(2021)
Wireless pH-logger label for intelligent food packaging.
FLEXIBLE AND PRINTED ELECTRONICS.
6,
4
특허/프로그램
전도성 고분자의 표면 플라즈모닉 현상을 이용한 광 PCR 시스템 및 이를 이용한 타겟 핵산의 실시간 검출.
10-2020-0109881.
20230125.
대한민국
R2R 공정을 이용한 오가노이드 실시간 모니터링 장치 제조.
10-2020-0108808.
20221202.
대한민국
위변조 방지를 위한 NFC QR 코드 라벨 및 NFC QR 코드 라벨의 제조 방법.
17/146471.
20221018.
미국
TiO2 나노구조 기반 핵산 검출장치 및 롤투롤 공정을 이용한 이의 제조방법.
10-2020-0109719.
20220926.
대한민국
플라즈모닉 우물 기반 핵산 검출장치 및 롤투롤 공정을 이용한 이의 제조방법.
10-2020-0108807.
20220718.
대한민국
R2R 랭뮤어-블로젯 공정을 이용한 핵산 검출장치 제조.
10-2020-0109679.
20220704.
대한민국
롤투롤 공정으로 제조된 그래핀 기반 표면 플라즈몬 공명 분자진단 장치및 이의 제조방법.
10-2020-0109700.
20220527.
대한민국
세포 또는 조직의 3차원 배양 및 모니터링용 센서 및 이의 롤투롤(R2R) 기반 제조 방법.
10-2020-0075062.
20220512.
대한민국
롤투롤 인쇄 기반 인쇄 렉테나 제조 방법 및 인쇄 렉테나와 이를 이용한 전자 장치.
10-2020-0014174.
20220127.
대한민국
멀티 패시베이션을 이용한 인쇄 전자소자 제조 방법 및 인쇄 전자소자.
10-2020-0011228.
20220110.
대한민국
n-형 박막 트랜지스터를 인쇄하기 위한 n-형 도핑 잉크, n-형 도핑 잉크를 이용하여 n-형 박막 트랜지스터를 인쇄하는 방법.
10-2018-0165193.
20210414.
대한민국
NFC 태그에 구비된 인쇄 슈퍼 캐패시터 제조 방법 및 인쇄 슈퍼 캐패시터를 포함하는 NFC 태그 제조 방법.
10-2018-0165172.
20210120.
대한민국
롤투롤 그라비아 인쇄를 이용한 온도 센서 태그 제조 방법.
10-2019-0010823.
20210113.
대한민국
위변조 방지를 위한 NFC QR 코드 라벨 및 NFC QR 코드 라벨의 제조 방법.
10-2018-0165590.
20200727.
대한민국
유연 열저항기 제조 방법, 유연 열저항기를 포함하는 온도 감지 장치 제조 방법, 및 유연 열저항기를 포함하는 온도 감지 장치.
10-2017-0167041.
20191223.
대한민국
Method for manufacturing angle and curvature detection sensor, and sensor (각도의 제조과정과 굴곡 형태 검출 센서 및 센서).
15526334.
20191119.
미국